|
 |
June
2007 |
The GamuT CD-3 CD Player
Martin Appel |
| |
My
first reaction to seeing ads for GamuT in the magazines was, “Where have
they been hiding?” My first meeting with GamuT gear was at a New York
Stereophile Show about ten years ago. The company had a run of success
with their original CD-1 CD player and their line of solid state amplifiers.
Both their amps and CD player met with a wide body of critical approval
in the audio press and were sought after by many. The CD player, as well
as the amps, went through various upgrades and improvements to address
some lingering criticisms as to relating to performance in the frequency
extremes, for the CD player and, for some, their amplifiers sounding a
little too analytical and sterile. The company has since changed hands
-- Lars Golar is now in charge and is the design and spiritual leader
of this Danish company. He believes in using solid science as the basis
for his designs and in the end, like any designer worth his salt, he listens.
The CD-3 is quite large and heavy with
well ordered cosmetics. The symmetrical arrangement of function buttons
has written words on the brightly lit display, which has three settings:
full on, reduced and off. Of course when 'off' is selected you can't read
any of the disc information or functions. At least the remote, rather
skimpy at this price level, has the usual function symbols. The CD-3's
face plate is of a substantial solid piece of clear anodized aluminum,
about a half inch thick, and the unit's footers have three silicon beads
each to further isolate the player from vibration induced distortion.
The CD-3 arrived and I couldn't turn
it on. I contacted David Stevens of Rhythm Marketing (US distributor)
and he told me that the on/off switch is on the underside of the CD player,
near the front at the right side. I found this a very odd location, not
intuitive at all. I later found this mentioned on the inside rear page
of the manual. Once I turned on the unit I proceeded to let the unit,
burn in for the recommended two hundred hours with a variety of music
and the XLO burn-in disc, as well. The burn-in also included a pair of
balanced GamuT interconnects which the manufacturer sent along (but are
not included with the unit). These are a twisted pair of silver plated
copper interconnects that retail for $500.00 for a one meter pair. Therefore,
my review also takes into account these interconnects. The power cord
was of the standard variety and the manual encouraged the use of after
market cords.
Before I get started with sonic impressions,
I want to briefly describe some of the technical properties of the CD-3.
The CD player is internally separated, by a stainless steel inner chassis,
dividing the player into three distinct inner cabinets. This division
isolates the separate digital and analogue power supplies from the suspended
transport mechanism and dac, as well as, isolating the amplification section.
The non magnetic stainless steel inner cabinet, running down the center
of the unit, effectively prevents minute electrical signals and currents
from intruding and contaminating the final signal and introducing unwanted
distortions resulting in loss of detail retrieval and a smearing of the
final sound. A 24 bit 192 kHz asynchronous sample rate converter was used
to generate the up sampled signal for the 24 bit Burr-Brown PCM 1792 converter.
My first full listening session was with
the supplied power cord and the supplied GamuT interconnects. Reading
my notes, they were as follows: dead quiet background, grain free, very
dynamic, deep soundstage with excellent transparency and more detail of
which I've been accustomed. Frank Sinatra's and Holly Cole's voices had
great immediacy and palpability. Imaging was excellent. Inner detail and
voice textures were further revealed. On large orchestral works, string
sections were more completely defined. I was hearing more of the individual
instruments, the bows being drawn across the strings if you will, rather
more like the experience one gets at a live concert sitting in the first
few rows of the concert hall. The interplay between sections was also
easier to follow. In general, images were more distinct across the board,
in all soundstage dimensions. Clarity and resolution were there in spades
with more air and separation around instruments. This player drew more
detail out of the bits than I've previously experienced. That stainless
steel isolation must really be working. On the negative side, I noticed
a slight bass shyness and a tendency of voices to be leaner and cooler
then I thought they should be. Also, the images seemed unnaturally sharp,
as if there was too much, borrowing a term from the video world, 'edge
enhancement'. Was this effect the result of the player, the interconnects,
or the power cord? It was now time to further investigate. Ah, more fun.
My first change was replacing the power
cord with my reference, Acoustic Zen's Absolute power cord. Immediately,
images took on more body and weight and the 'edge ehancement' was reduced
with, if anything, a gain in inner textures. The images seemed more natural
in their presentation. The leanness I had heard was now almost gone. Soundstage
depth, already excellent, improved as well. Voices seemed to be richer
and fuller. Anyone who thinks power cords don't make a difference should
reexamine those assumptions. It brought out more of what this CD-3 was
capable of. It clearly pays to experiment with power cords and at this
price level you're doing yourself a disservice not to. Now it was time
to try examining interconnects.
I used Wasatch's excellent Ultama, Acoustic
Zen's Silver Reference II and Acoustic Zen's Absolute. All had their individual
characteristics but the Absolute really proved to be the best and offered
the most complete improvement in the quality of sound. The bass performance
further improved with greater weight and articulation. The soundstage
seemed to grow in size with greater depth while the sound became noticeably
smoother. It further improved localization of instruments and voices in
the soundstage. High frequency performance also improved and cymbal strikes
had more impact with greater definition with an even further clarification
of low level detail. I now felt that this player was reaching heights
I had not experienced from a CD player before.
My ultimate criterion for evaluating
a component is how close its ability to convey the feeling of the live
performance. The GamuT CD-3, with an appropriate level power cord and
interconnects achieves this more completely than any other CD player I've
had in my system. The combination gives a vitality and immediacy that
signifies 'live'. Audiophiles all have differing points of view as to
how something should sound and I won't tell you it will satisfy everyone.
As I indicated earlier, the CD-3, gives the listener (at least in my system)
an upfront presentation of the music. System matching would be key. If
one likes a 'soft', 'tubey' sound this might not be your cup of tea. If
you're looking to liven up a soft sounding system that is lacking in detail
and dynamics, look no further. GamuT's CD-3 can perform magic. Highly
recommended. I will miss this player. Keep listening.
|
Manufacturer's Comment
I thank you very much for your detailed and thorough
review, explaining in detail the excellent musical characteristics of
our CD3. We fully agree on all of your flattering comments on the CD3,
and the importance of matching the performance between different components
to adjust the character and level of reproduction accuracy of a high performing
audio reproduction system.
The CD3, as all GamuT products, are developed to have the highest possible
potential of reproduction, which with a small effort in setup and matching
with associated equipment and the acoustic surroundings, will result in
true to life realistic dynamics and 3-dimensional reproduction of all
kinds of recorded music.
We from our side thank you very much for confirming
this in your excellent review.
Best regards,
Lars Goller
Associated Components
Speakers: Wasatch Acoustics, MUSINA
Amplifiers: A pair of Innersound iPower 330s
Processor: DEQX PDC-2.6P
Preamplifier: Innersound iControl
CD source: Classe CDP 100
Analogue source: Avid Volvere / RB300 arm.
Cartridge: Shelter 7000
Speaker cables: Acoustic Zen’s Absolute, Wasatch’s Ultama
Power Cords, Acoustic Zen’s Absolute and Gargantua
Interconnects: Acoustic Zen’s Absolute and Silver Ref II,
Wasatch’s Ultama
Accessories: Sound Fusion’s Sound Boosters and Vibe Busters, Black
Diamond Racing Cones, Soundcare products, Monster HTS 2000 Power strip,
Acme Audio Labs wall outlets.
Sources
Holly Cole, DON’T SMOKE IN BED, Alert Z2 81020
Frank Sinatra, SINGS FOR ONLY THE LONELY, Capitol 94756
Sean Smith, POISE, Ambient Records cd-002
RHAPSODIES-Liszt-Enesco-Wagner-Smetana, Stokowski, RCA Living Stereo 09026-61503-2
RESPIGHI, Belkis, Queen of Sheba, OUE/Minnesota Orch. Reference Recording,
RR-95CD
Manufactured by GamuT International A/S
Sandgaardsvej 31, DK-7400, Herning, Denmark
Phone: +45 70 20 22 68 · Fax: +45 59 43 97 26
Price: USD$6000.00
E-mail: info@gamutaudio.com
GamuT Audio website
|